All articles Guides ·

The BIM mandate in Italian public procurement: threshold, exclusions and obligations

Since 1 January 2025 BIM has been mandatory for Italian public works above 2 million euros: which works it applies to, what is excluded, what to do.

Topic
Guides
Published
20 November 2026
Author
B1P Group editorial team
Have a question? Write to us

Article 43 of the Italian Public Contracts Code (Legislative Decree 36/2023), amended by the corrective Legislative Decree 209/2024, has made digital information management methods and tools in construction, that is BIM, mandatory for part of public works since 1 January 2025. Annex I.9 sets out how to apply them. This guide summarises what the mandate applies to, what is excluded and what contracting authorities, designers and contractors must do.

When BIM is mandatory

From 1 January 2025 contracting authorities and granting bodies must adopt BIM for the design and construction of new works and of works on existing assets with an estimated cost of works above 2 million euros.

For works on buildings covered by Article 10(1) of the Cultural Heritage Code (Legislative Decree 42/2004) the threshold is not 2 million euros but the EU works threshold set by Article 14(1)(a) of the Public Contracts Code. For 2026-2027 that threshold is €5,404,000.

The corrective decree raised the threshold, which in the original text was a base tender amount of 1 million euros, and linked it to the estimated cost of works.

CaseDigital information managementReference
New works or works on existing assets with an estimated value above €2 millionMandatory since 1 January 2025Art. 43, paragraph 1, Legislative Decree 36/2023
Works up to €2 millionOptional, with bonus points possibleArt. 43, paragraph 2
Works on buildings covered by art. 10, paragraph 1, of the Cultural Heritage CodeMandatory above the EU works threshold: €5,404,000 for 2026-2027Art. 43, paragraph 1; art. 14, paragraph 1, letter a)
Ordinary and extraordinary maintenanceExcluded, unless the asset was built using digital information management methods and toolsArt. 43, paragraph 1

What is excluded

The mandate does not apply to ordinary and extraordinary maintenance, unless it concerns assets already built with digital information management methods and tools. Below the threshold, and in the other non-mandatory cases, the contracting authority can still adopt BIM, also with bonus points for its use in the tender documents, always in compliance with Annex I.9.

What contracting authorities must do

Before a contracting authority adopts BIM, whatever the value of the works, Annex I.9 (paragraph 2) requires three steps:

  • a staff training plan, for financial, administrative and technical roles;
  • a plan for acquiring, managing and maintaining hardware and software;
  • an organisational act setting out roles, responsibilities, decision-making processes, information flows and standards.

Then come the roles of paragraph 3: a manager of the common data environment and at least one manager of digital processes, and for each project a coordinator of information flows within the team supporting the RUP (responsabile unico del progetto, the contracting authority's sole project manager). These roles are preferably filled internally, with documented competence; if internal staff are not enough, the functions are outsourced. The contracting authority adopts its own common data environment (paragraph 4) and prepares the exchange information requirements for each tender.

What designers and contractors must do

In tenders awarded on the most economically advantageous tender, bidders also submit the pre-appointment BIM execution plan, which responds to the exchange information requirements. After the award, the successful tenderer writes the BIM execution plan, to be submitted to the contracting authority after the contract is signed and before execution. Deliveries go through the contracting authority's common data environment, in open, non-proprietary formats. At the end of the works, for testing and acceptance or the conformity check, the contractor hands over the models updated as built, with a report on their compliance with the exchange information requirements.

The technical standards of reference

Annex I.9 names the UNI EN ISO 19650 series as the main reference and the UNI 11337 series as a further useful reference. The guidelines of the Ministry of Infrastructure and Transport of February 2026 give contracting authorities operational guidance. The acronyms found in these documents are explained in the BIM glossary.

Frequently asked questions about the BIM mandate

Since when has BIM been mandatory in Italian public procurement?

Since 1 January 2025, for new construction and for works on existing assets with an estimated cost of works above 2 million euros (art. 43 of Legislative Decree 36/2023, as amended by Legislative Decree 209/2024). For buildings covered by Article 10(1) of the Cultural Heritage Code the EU works threshold applies.

Is BIM mandatory for maintenance?

Not for ordinary and extraordinary maintenance, unless the work concerns an asset already built with digital information management methods and tools.

Can BIM be required below 2 million euros?

Yes: the contracting authority can adopt it by choice, also with bonus points in the tender documents, in compliance with Annex I.9.

What must a contracting authority do before requiring BIM?

Adopt the staff training plan, the hardware and software plan and the organisational act, appoint the required roles and set up its own common data environment (Annex I.9, paragraphs 2, 3 and 4).

Which BIM documents are needed in a tender?

The exchange information requirements, prepared by the contracting authority; in tenders awarded on the most economically advantageous tender, the pre-appointment BIM execution plan submitted by the tenderers; the BIM execution plan, written by the successful tenderer after the contract is signed.

Sources

  • Legislative Decree no. 36 of 31 March 2023, art. 43 and Annex I.9, as amended by Legislative Decree no. 209 of 31 December 2024
  • Legislative Decree no. 42 of 22 January 2004, art. 10, paragraph 1
  • Delegated Regulations (EU) 2025/2150, 2025/2151 and 2025/2152, EU thresholds for 2026-2027
  • Ministry of Infrastructure and Transport, guidelines on digital information management, February 2026
  • UNI EN ISO 19650 and UNI 11337

How we work

For contracting authorities, B1P Group prepares the organisational act and the exchange information requirements and supports the RUP. For designers and contractors it reads the requirements and tender rules and writes the pre-appointment plan and the BIM execution plan with its BIM tender support.

Shall we discuss it
for your project?